Creating Two Derived Point Parts

Create two point parts at the positions of the point receivers.

Use the following steps:
  1. Right-click the Scenes > Geometry Scene 1 node and select Open.
  2. In the Simulation window, right-click the Derived Parts node and select New Part > Probe > Point.
  3. In the Create Point panel, do the following:

    In the Input Parts box, select Body 1 and Imported models > simh:cylinderPressureData > Imported Surfaces > Body 1: Cylinderwall.

    Set the Point to [0, 1.01, 0] m, m, m.

    Under Display, select No Displayer.

    Click Create and then Close.

  4. Rename the Derived Parts > Point node to Plus90deg100r.

Create another probe by copying and pasting the first one:

  1. Right-click the Plus90deg100r entry and select Copy.
  2. Right-click the Derived Parts node and select Paste.
  3. Rename the copy to Minus90deg100r.
  4. In the Properties window, set Point to [0,-1.01,0] m, m, m.