Home
Post-Processing
Simcenter STAR-CCM+ allows you to post-process the solution after each iteration or time-step, (while the simulation is running), as well as when the simulation completes. For this reason, you generally create post-processing objects before running the simulation. Post-processing objects are also known as analysis objects.
Monitoring the Solution
Monitors sample, save, and plot solution data.
Using Report-Based Monitors
This section explains:
Monitoring Report Results on a Per-Part Basis
For a report-based monitor, you can instruct the monitor to capture results for some or all of the parts addressed by the underlying report.

Share

Link: copied

Breadcrumb: copied

Post-Processing
Simcenter STAR-CCM+ allows you to post-process the solution after each iteration or time-step, (while the simulation is running), as well as when the simulation completes. For this reason, you generally create post-processing objects before running the simulation. Post-processing objects are also known as analysis objects.
- Analysis Workflow
  The key steps in successfully analyzing simulation results are to: (1) be clear on what quantities you want to extract; (2) locate or define surfaces on which to obtain the data; and, (3) present the data in visual scenes or numeric output.
- Data Interpolation
  Most visualization objects such as plots, reports, and scalar displayers allow for smooth and non-smooth values. For example, the contour style for scalar displayers provides a Smooth Filled option (smooth) and a Filled option (non-smooth). The way these values are calculated depends on the discretization method.
- Field Function Interpolation and Interfaces (FV)
  For finite volume meshes, understanding how Simcenter STAR-CCM+ deals with field function data is important for avoiding non-physical results in post-processing at an interface, and to appreciate the difference that smoothing makes when it is applied.
- Accessing Solution Data through Derived Parts
  Although Simcenter STAR-CCM+ can display, analyze, and report simulation data on regions, boundaries, and parts, there are many cases when you want to access data in other entities of the solution space. Derived parts provide a mechanism for defining additional entities on which you can access solution data.
- Visualizing the Solution
  The visualization tools in Simcenter STAR-CCM+ are integrated with the analysis, allowing for the interactive extraction and viewing of solution data from either a running or converged simulation.
- Transient Solution Data
  For transient solutions, Simcenter STAR-CCM+ provides the simulation history file (.simh) to which you can save selected data while a simulation is running. After the simulation completes, you can load this file and query its states for post-processing.
- Sampling Data Values Using Reports and Monitors
  This workflow incorporates the roles of both reports and monitors.
- Accessing Field Data from Previous Time-Steps or Iterations
  A field history is a type of field monitor that stores a finite number of past values (or samples) of a field function, captured at moments defined by its update policy, for a given set of input regions or boundaries (or both).
- Reporting Results
  Reports provide summaries of solution data.
- Monitoring the Solution
  Monitors sample, save, and plot solution data.
  - What Is a Monitor?
    Monitors enable summary information from the simulation to be sampled and saved during the solution.
  - Customizing Monitors
    The way in which monitors sample data and send data to an XY plot can be customized to suit the particular quantity being monitored.
  - Using Report-Based Monitors
    This section explains:
    - What Is a Report-Based Monitor?
      Report-based monitors are useful for monitoring quantities of engineering interest during a simulation. They provide a dynamic record of these quantities during solution iteration.
    - Monitoring Report Results on a Per-Part Basis
      For a report-based monitor, you can instruct the monitor to capture results for some or all of the parts addressed by the underlying report.
  - Field Function Monitors
    There are seven varieties of field function monitor. During a simulation run, they collect data samples for a selected part at a frequency that you specify.
  - Field Histories
    A field history is a type of field monitor that lets you access field data from previous time-steps or iterations.
  - Properties of the Monitors Manager
    These properties allow you to control how the monitor data appears in the output.
  - Pop-Up Menu of the Monitors Manager
    These are the pop-up menu items available when you right-click the Monitors manager node.
- Plots
  The plotting features in Simcenter STAR-CCM+ allow you to create three kinds of two-dimensional plots.
- Exploring Solutions with Data Focus
  This interactive tool lets you extract knowledge of merit -- information that facilitates a correct engineering decision -- from a large volume of data.
- Parametric Positioning for Analysis Surfaces in Turbomachine Domains
  In studies of cases of revolving volumes, such as turbomachinery, a typical requirement for post-processing is to render and plot data on surfaces or profiles that are positioned parametrically in relation to the domain bounding surfaces. For example, you may wish to view the total pressure on a surface located exactly half-way between the hub and shroud, or you may wish to plot pressure across both blade surfaces on a given slice.
- Triggers and Update Events
  Several features of Simcenter STAR-CCM+ require that you define a trigger for when an action takes place. Simcenter STAR-CCM+ provides three built-in trigger types, and one custom trigger type (defined by an update event).
- Signal Processing
  Signal processing applies data set functions to sets of wave data.

Monitoring Report Results on a Per-Part Basis

For a report-based monitor, you can instruct the monitor to capture results for some or all of the parts addressed by the underlying report.

You can also use an expression report to access parts in a user-defined field function. See Accessing Report Values and Co-located Field Function Values.

To define a monitor that captures parts-based values:

Ensure that the initial report from which you create the monitor is a report that addresses multiple parts.
If a region is composed of multiple geometry parts, set the report to observe the geometry parts rather than the region.
Right-click the report node and select Create Monitor and Plot from Report.
Select the resulting [monitor] node and set Value Type to Part Values.
The Parts sub-node appears with all report parts selected.
If you wish to monitor values for a subset of the report parts, select the Parts sub-node and set Parts to the ones that you want to observe.
The plot associated with this monitor shows all the selected part report values along with the overall value of the report. To work with these values in the monitor plot, see instructions for controlling the appearance of selected part values in a monitor plot.
When you click a line on the monitor plot, you can identify the part to which the line belongs.

The following report types do not yet support per-part value access:

Boundary Parameter Sensitivity
Element Count
Frontal Area
Generalized Vibratory Force
Heat Exchanger (Single Stream and Dual Stream)
Reaction Force (Finite Element and Finite Volume)
Reaction Moment (Finite Volume only)