Home
Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
Motion
The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
Moving Reference Frames: Rotating Fan
This tutorial outlines the steps that are required to set up and run a rotating radial fan analysis. It uses the Moving Reference Frame model, a steady-state approach that involves two or more frames of reference that can be stationary or moving relative to each other.
Setting Initial Conditions
Change the turbulence parameters that are set as part of the initial conditions.

Link: copied

Breadcrumb: copied

Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
- Using Tutorial Macros and Files
  Macros, input files, and final simulation files for a range of tutorials are provided as an optional download package on the Support Center website. These macros and final simulation files are provided as an aid to the written tutorials, so that you can check your final results against the downloaded files, or against a simulation that is built and run using the macros.
- Introduction
  Welcome to the Simcenter STAR-CCM+ introductory tutorial. In this tutorial, you explore the important concepts and workflow. Complete this tutorial before attempting any others.
- Foundation Tutorials
  The foundation tutorials showcase the major features of Simcenter STAR-CCM+ in a series of short tutorials.
- Geometry
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for creating and working with parts and 3D-CAD.
- Mesh
  The tutorials in this set illustrate various STAR-CCM+ features for building CFD meshes.
- Incompressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
- Compressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for compressible fluid flows as well as harmonic balance.
- Heat Transfer and Radiation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for heat transfer, radiation, and thermal comfort.
- Multiphase Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating multiphase fluid flow problems
- Discrete Element Method
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
- Motion
  The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
  - Moving Reference Frames: Rotating Fan
    This tutorial outlines the steps that are required to set up and run a rotating radial fan analysis. It uses the Moving Reference Frame model, a steady-state approach that involves two or more frames of reference that can be stationary or moving relative to each other.
    - Loading the Starting File and Generating the Mesh
      To set up the STAR-CCM+ simulation, load the starting simulation supplied and generate the volume mesh.
    - Setting up Physics Models
      The mesh consists of two regions: Blower Surround and Rotating. However, since the two regions contain the same material, and are connected by an interface, only one continuum is needed for the simulation. The physical models for this continuum are defined next.
    - Creating a Moving Reference Frame
      Create a moving reference frame for the rotating region.
    - Setting Initial Conditions
      Change the turbulence parameters that are set as part of the initial conditions.
    - Setting Boundary Conditions
      Here you specify the fluid velocity at the inlet. No changes are required for wall velocities within the rotating region as the reference frame automatically defines them.
    - Setting Solver Parameters and Stopping Criteria
      To make sure that a reasonable solution is obtained, apply linear ramps to the key under-relaxation parameters and also tighten the AMG linear solver convergence tolerance.
    - Visualizing the Solution
      Visualize the solution while it is being updated by plotting velocity vectors on an x-y section bisecting the problem geometry.
    - Reporting Monitoring and Plotting
      Simcenter STAR-CCM+ can dynamically monitor virtually any quantity while the solution develops. The process involves setting up a report which defines the quantity of interest and the parts of the region to monitor. A monitor is then defined based on the report which controls the update frequency and normalization characteristics. An X-Y graph plot can then be made from the monitor.
    - Running the Simulation
      You can now run the simulation.
    - Visualizing the Results
      You can visualize the velocity vector results for the converged solution.
    - Summary
      This tutorial demonstrated how to set up a moving reference simulation in Simcenter STAR-CCM+.
  - Rigid Body Motion: Rotating Fan
    This tutorial models the same radial fan problem as the Moving Reference Frames: Rotating Fan tutorial. However, instead of using the steady-state moving reference frame model, this tutorial uses the transient Rigid Body Motion model with actual mesh rotation.
  - DFBI: Lifeboat with Overset Mesh
    This tutorial demonstrates use of the Overset Mesh feature with free surface flow and DFBI to model the motion of a lifeboat falling into water. Simcenter STAR-CCM+ automates the grid overlapping process.
  - DFBI and AMR: Boat In Parameterized Waves
    In Dynamic Fluid-Body Interaction (DFBI) simulations, you can use Adaptive Mesh Refinement (AMR) to dynamically refine the mesh around a moving 6-DOF body based on the computed flow solution.
  - Marine Resistance Prediction: KCS Hull with a Rudder
    This tutorial demonstrates the workflow for setting up a resistance prediction simulation for a marine application.
  - Moving Reference Frames: Marine Propeller in Open Water
    This tutorial demonstrates the workflow for setting up an open water simulation for a marine propeller.
  - Body Force Propeller Method: Marine Self-Propulsion
    One of the challenges in marine engineering is to predict the speed with which a ship hull moves through water in response to the thrust supplied by a spinning propeller. Simcenter STAR-CCM+ provides a methodology by which you can predict this speed.
  - Blade Element Method: Helicopter Rotor-Fuselage Interaction
    The rotating main rotor blades of a helicopter generate a complex flow field that leads to periodic aerodynamic loads on the airframe. Because of these aerodynamic loads, the passenger cabin can be subject to noise and vibration. These aerodynamic interactions affect the performance of helicopters and they can cause structural damage. Simcenter STAR-CCM+ provides a method for simulating the flow generated by rotor blades that does not require you to mesh the blades individually. This method allows you to predict the complex flow field around a helicopter taking into account the fuselage and rotor flow field interaction.
  - Morphing: Cylinder with Boundary Motion
    Simcenter STAR-CCM+ contains a Morphing Motion Model that enables you to define motion on boundary surfaces using several methods.
  - Overset Mesh Small Gap Modeling: Lobe Blower
    Rotary lobe blowers are valveless positive-displacement units. Fluid is pumped by two counter-rotating lobes that are mounted on parallel shafts. Fluid enters through the expanding volume at the suction side of the pump. As the lobes continue to rotate, the fluid is compressed between the lobes and the pump casing and hence transported towards the discharge.
  - Trajectory Motion: Paint Dipping of a Chassis on a Fixed Skid
    Paint dipping is a process by which a component is coated with paint in a dipping tank. Simcenter STAR-CCM+ allows you to simulate this process and therefore study the effects of different trajectories and component speeds.
  - General Remesh: Gerotor Pump with Small Gap
    A Gerotor pump is a unit with an inner and an outer rotor that have different rotational speeds related to their tooth numbers. The dynamically changing volume between the rotors transports the liquid from inlet to outlet.
- Reacting Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating reacting flows such as combustion.
- Solid Stress
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for computing deformation, strain, and stresses in solid regions. They also show how such computations can be coupled to the fluid behavior in an analysis of fluid-structure interaction.
- Aeroacoustics
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for solving aeroacoustic simulations.
- Electromagnetism
  The following tutorials illustrate features for solving problems that involve electromagnetic fields.
- Electrochemistry
  The following tutorial demonstrates chemical reactions induced by an electrical current.
- Battery
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for setting up a battery model:
- Automation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
- Design Exploration
  The tutorials in this set illustrate various features for running design exploration studies in Design Manager.
- Coupling with CAE Codes
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
- Analysis Methods
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for analysing and visualizing simulation data.
- Simcenter STAR-CCM+ In-cylinder
  The tutorials in this set illustrate features for simulating internal combustion engines in Simcenter STAR-CCM+ using the dedicated add-on Simcenter STAR-CCM+ In-cylinder.

Setting Initial Conditions

Change the turbulence parameters that are set as part of the initial conditions.

To set the initial conditions:

Edit the Continua > Physics 1 > Initial Conditions node and set the following properties:


Node	Property	Setting
Turbulence Specification	Method	K + Epsilon
Turbulent Dissipation Rate	Value	150.0 m^2/ s^3
Turbulent Kinetic Energy	Value	1.5 J/kg

Save the simulation.