Home
Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
Coupling with CAE Codes
The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
gPROMS File Export: Spray Dryer
Simcenter STAR-CCM+ allows for one-way coupling with gPROMS, a process modeling platform for the simulation of complex systems. In Simcenter STAR-CCM+ you reduce three-dimensional solution data to discrete values defined for clusters of cells; data from these clusters can then be exported to a network in gPROMS.
Running the Simulation and Exporting the Solution
Run the simulation to convergence and export the solution to a file.

Share

Link: copied

Breadcrumb: copied

Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
- Using Tutorial Macros and Files
  Macros, input files, and final simulation files for a range of tutorials are provided as an optional download package on the Support Center website. These macros and final simulation files are provided as an aid to the written tutorials, so that you can check your final results against the downloaded files, or against a simulation that is built and run using the macros.
- Introduction
  Welcome to the Simcenter STAR-CCM+ introductory tutorial. In this tutorial, you explore the important concepts and workflow. Complete this tutorial before attempting any others.
- Foundation Tutorials
  The foundation tutorials showcase the major features of Simcenter STAR-CCM+ in a series of short tutorials.
- Geometry
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for creating and working with parts and 3D-CAD.
- Mesh
  The tutorials in this set illustrate various STAR-CCM+ features for building CFD meshes.
- Incompressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
- Compressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for compressible fluid flows as well as harmonic balance.
- Heat Transfer and Radiation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for heat transfer, radiation, and thermal comfort.
- Multiphase Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating multiphase fluid flow problems
- Discrete Element Method
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
- Motion
  The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
- Reacting Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating reacting flows such as combustion.
- Solid Stress
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for computing deformation, strain, and stresses in solid regions. They also show how such computations can be coupled to the fluid behavior in an analysis of fluid-structure interaction.
- Aeroacoustics
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for solving aeroacoustic simulations.
- Electromagnetism
  The following tutorials illustrate features for solving problems that involve electromagnetic fields.
- Electrochemistry
  The following tutorial demonstrates chemical reactions induced by an electrical current.
- Battery
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for setting up a battery model:
- Automation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
- Design Exploration
  The tutorials in this set illustrate various features for running design exploration studies in Design Manager.
- Coupling with CAE Codes
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
  - Simcenter STAR-CCM+ to Simcenter STAR-CCM+ Coupling: Heat Transfer in a Chimney
    This tutorial demonstrates the process for modeling conjugate heat transfer using Simcenter STAR-CCM+ to Simcenter STAR-CCM+ thermal co-simulation.
  - Simcenter Nastran Co-Simulation: Disc Valve
    To solve fluid-structure interaction problems, you can couple Simcenter STAR-CCM+ and Simcenter Nastran in a co-simulation analysis. Simcenter STAR-CCM+ computes the flow solution and Simcenter Nastran computes the structural analysis for the solid.
  - FMU Co-Simulation with Simcenter Amesim: Check Valve
    Simcenter STAR-CCM+ can exchange data with Simcenter Amesim through imported FMU models. An FMU is a time-dependent model written in the Functional Mock-up Interface (FMI) standard.
  - FMU Co-Simulation: Temperature Controller
    Simcenter STAR-CCM+ can exchange single-value data with imported FMU models. FMU models are time-dependent models that are written according to the Functional Mock-up Interface (FMI) standard.
  - Abaqus File-Based Coupling: Exhaust Manifold
    The purpose of this tutorial is to demonstrate the typical workflow in running a thermal fluid-structure interaction case using the file-based coupling method with Abaqus.
  - Abaqus Co-Simulation: Thermal Coupling
    This tutorial demonstrates how to run a thermal co-simulation case using Simcenter STAR-CCM+ and Abaqus. Co-simulation involves a strong coupling between the two codes, in which data exchange occurs at frequent intervals, that are known as coupling steps. In this case, data is exchanged at the end of each time-step, and a relatively large time-step is used to approximate a steady-state solution.
  - Abaqus Co-Simulation: Mechanical Coupling
    This tutorial demonstrates how to carry out a mechanical co-simulation case using Simcenter STAR-CCM+ and Abaqus. Co-simulation involves a strong coupling between the two codes. Data is exchanged at frequent intervals that are called coupling steps. This level of communication between the solvers allows you to obtain a full solution across the fluid-solid interface.
  - gPROMS File Export: Spray Dryer
    Simcenter STAR-CCM+ allows for one-way coupling with gPROMS, a process modeling platform for the simulation of complex systems. In Simcenter STAR-CCM+ you reduce three-dimensional solution data to discrete values defined for clusters of cells; data from these clusters can then be exported to a network in gPROMS.
    - Prerequisites
      The instructions in this tutorial assume that you are already familiar with certain techniques in Simcenter STAR-CCM+.
    - Loading the Initial Simulation
      For this simulation, you are provided with a starting file that includes the required fluid region and physics continuum. Load the starting simulation in Simcenter STAR-CCM+ and generate the fluid mesh.
    - Defining Cell Clusters
      To reproduce the zones defined in the gPROMS network model, you group the Simcenter STAR-CCM+ mesh cells into clusters based on their position.
    - Defining the External Continuum and Region
      To export data to gPROMS, you require a physics continuum and a region that represent the gPROMS network in the Simcenter STAR-CCM+ simulation.
    - Specifying the Coupled Region and Boundaries
      To export data to gPROMS, you couple the fluid region with the gPROMS network, and couple the inlet, outlet, and wall boundaries with corresponding gPROMS environment zones and surfaces.
    - Exporting the Lagrangian Phase Data
      When you export data to gPROMS, you can include particle data from Lagrangian phases that are defined in the simulation.
    - Running the Simulation and Exporting the Solution
      Run the simulation to convergence and export the solution to a file.
  - GT-SUITE Co-Simulation: 1D Coupling
    This tutorial demonstrates the typical workflow for co-simulation with the engine simulation code GT-SUITE from Gamma Technologies.
  - Co-Simulation API: Spindle Valve
    This tutorial demonstrates how to use the Simcenter STAR-CCM+ Co-Simulation API (Application Programming Interface), in order to couple a partner program to a Simcenter STAR-CCM+ simulation. The partner simulation models the behavior of a spindle ball valve in response to a multiphase flow.
  - CGNS File Import: Stress Analysis with Imported Fluid Loads
    Simcenter STAR-CCM+ allows you to import external mesh and solution data in the form of a CGNS file. You can apply the solution data stored in the CGNS file to regions or boundaries within Simcenter STAR-CCM+.
  - Rotor Blade Aeroelasticity: Modeling Elastic Blade Deformation
    Simcenter STAR-CCM+ allows you to model the aeroelastic performance of elastic rotor blades using displacement and twist data from external files, which can be obtained in multi-body dynamics software such as RCAS, CAMRAD-II, DYMORE, and FLIGHTLAB.
- Analysis Methods
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for analysing and visualizing simulation data.
- Simcenter STAR-CCM+ In-cylinder
  The tutorials in this set illustrate features for simulating internal combustion engines in Simcenter STAR-CCM+ using the dedicated add-on Simcenter STAR-CCM+ In-cylinder.

Running the Simulation and Exporting the Solution

Run the simulation to convergence and export the solution to a file.

Define stopping criteria for the simulation:

Select the Stopping Criteria > Maximum Steps node and set Maximum Steps to 350.
Select the Solvers > Lagrangian Multiphase > Steady > Iteration Update Frequency.

By default, the Lagrangian Multiphase solver starts solving after 10 iterations and updates the solution every 10 iterations. To speed up the simulation running time, you can increase the update frequency, so that the Lagrangian Multiphase solver runs only once, during the last iteration of the fluid solver:

Select the Iteration Update Frequency and set Update Frequency to 340.
Click (Run).
When the solution is complete, save the simulation.
Saving the simulation before export ensures that the latest particle data are included in the track file and correctly exported.

To export the solution to a file:

Select the External Links > gPROMS File > Values > File node.
By default, Simcenter STAR-CCM+ saves the file to the current directory as solution.hdf5. The default settings are appropriate to this tutorial.
Right-click the External Links > gPROMS File node and select Export File.
You can import the solution.hdf5 file in gPROMS.