Electrochemistry Bibliography

[824]
Cagnoni, Davide; Agostini, Francesco; Christen, Thomas; Parolini, Nicola; Stevanović, Ivica; de Falco, Carlo. “Multiphysics simulation of corona discharge induced ionic wind”. Journal of Applied Physics, Volume 114, Issue 23, pp. 233301-233301-10 (2013).

[825]
O. R. J. G. a. J. M. V. Costa-Nunes, "Comparison of the performance of Cu–CeO 2–YSZ and Ni–YSZ composite SOFC anodes with H 2, CO, and syngas," Journal of power sources, vol. 141, no. 2, pp. 241-249, 2005.

[826]
Douglas P. Riemer, Mark E. Orazem, Application of boundary element models to predict effectiveness of coupons for accessing cathodic protection of buried structures. Corrosion (2000) Vol. 56, No. 8, pp. 794-800.

[827]
Doyle, C.M. 1995. “Design and Simulation of Lithium Rechargeable Batteries.” PhD Thesis, Department of Chemical Engineering, University of California, Berkeley.

[828]
Doyle, M., Fuller, T. F. and Newman, J. 1993. “Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell.” Journal of The Electrochemical Society., 140 (6), pp. 1526–1533.

[829]
Georgiadou, Maria and Richard Alkire. "Anisotropic Chemical Pattern Etching of Copper Foil." J. Electrochem Soc (1994): 679-689.

[830]
K.L. Gering, Prediction of electrolyte viscosity for aqueous and non-aqueoussystems: Results from a molecular model based on ion solvation and a chemicalphysics framework, Electrochimica Acta 51 (2006) 3125.

[831]
Krupa, Matthew, et al. "Cathodic Protection of Highly Complex and Shielded Components." Corrosion. 2006.

[832]
Neimarlija N. Demirdžić I. Muzaferija S. "Finite volume method for calculation of electrostatic fields in electrostatic precipitators". Journal of Electrostatics, Volume 67, Issue 1, p. 37-47 (2009).

[833]
Nels E. Jewell-Larsen, Sergey V. Karpov, Igor A. Krichtafovitch, Vivi Jayanty, Chih-Peng Hsu, Alexander V. Mamishev. “Modeling of corona-induced electrohydrodynamic flow with COMSOL multiphysics”. Proc ESA Annual Meeting on Electrostatic 2008, Paper E1.

[834]
Newman, J. and Thomas-Alyea, K. E. 2004. Electrochemical Systems., 3rd edn. J. Wiley. ISBN: 978-0-471-47756-3.

[835]
Probstein, R. 1998. "Physicochemical Hydrodynamics".

[836]
Springer, T.E., Zawodzinski and Gottesfeld, S. 1991. " Polymer Electrolyte Fuel Cell Model", J. Electrochem. Soc., 138(8), pp. 2334-2342.

[837]
Spotnitz, R. 2006. Porous Electrode Theory, ECS Short Course: Battery Design and Simulation.

[838]
Wu, H., Li, X. and Berg, P. 2009. " On the modeling of water transport in polymer electrolyte membrane fuel cells" , Electrochimica Acta, 54(27), pp. 6913-6927.

[839]
Zou, Y., J. Wang, and Y. Y. Zheng. "Electrochemical techniques for determining corrosion rate of rusted steel in seawater." Corrosion Science 53.1 (2011): 208-216.