Home
Interacting with CAE Software
Simcenter STAR-CCM+ can interact with a wide range of other computer-aided engineering (CAE) software. This interaction includes import/export of mesh and solution data as well as coupling capabilities for multiphysics simulations.
Simcenter STAR-CCM+ to Simcenter STAR-CCM+ Co-Simulation
Simcenter STAR-CCM+ allows you to couple two running simulations together in a co-simulation analysis. The Simcenter STAR-CCM+ to Simcenter STAR-CCM+ co-simulation capability targets analyses involving conjugate heat transfer (CHT), fluid-structure interaction (FSI), and exchange of any scalar or vector fields across the coupled boundaries or regions.
STAR-CCM+ Co-Simulation Workflow
Running the Co-Simulation
The following instructions outline the standard workflow for running a co-simulation. With a standard run, the co-simulation solver automatically executes the steps that are required in a co-simulation.
Restarting the Co-Simulation
You can run a co-simulation in multiple stages. Simcenter STAR-CCM+ co-simulation supports most of the common restart scenarios, providing that the partner simulations were in a consistent state when the co-simulation stopped.

Share

Link: copied

Breadcrumb: copied

Interacting with CAE Software
Simcenter STAR-CCM+ can interact with a wide range of other computer-aided engineering (CAE) software. This interaction includes import/export of mesh and solution data as well as coupling capabilities for multiphysics simulations.
- File Import and Export
  Simcenter STAR-CCM+ allows you to import mesh and solution data from other CAE packages using files. You can also export such data from Simcenter STAR-CCM+ for use in external software.
- File-Based Coupling (through Imported CAE Model)
  File-based coupling is a method used to couple Simcenter STAR-CCM+ with another CAE code via external files stored in the computer memory.
- Rotor Blade Aeroelasticity
  Rotor Blade Aeroelasticity (RBA) simulations model the aerodynamic performance of elastic rotor blades using displacement and twist data from external files. You can create these data files in multi-body dynamics software such as RCAS, CAMRAD-II, DYMORE, and FLIGHTLAB. Typical RBA applications include urban air vehicle rotors, wind turbines, and helicopter rotors.
- Simcenter STAR-CCM+ to Simcenter STAR-CCM+ Co-Simulation
  Simcenter STAR-CCM+ allows you to couple two running simulations together in a co-simulation analysis. The Simcenter STAR-CCM+ to Simcenter STAR-CCM+ co-simulation capability targets analyses involving conjugate heat transfer (CHT), fluid-structure interaction (FSI), and exchange of any scalar or vector fields across the coupled boundaries or regions.
  - Co-Simulation Interface and Exchanged Fields
    Simcenter STAR-CCM+ to Simcenter STAR-CCM+ co-simulation allows for data exchange across the coupled boundaries, or regions, of two running Simcenter STAR-CCM+ simulations.
  - STAR-CCM+ Co-Simulation Workflow
    - Preparing the Simulations for Co-Simulation
      Modify standalone Simcenter STAR-CCM+ simulations for interactive co-simulation.
    - Specifying the Coupled Model Parts
      In each simulation, create co-simulation zones to couple boundaries or regions across simulations.
    - Specifying the Exchanged Fields
      For each zone, specify the fields that are exported and imported during the co-simulation at the coupled parts selected for that zone. Simcenter STAR-CCM+ allows you to specify the exchanged fields using predefined mechanical and thermal fields, for common Fluid-Structure Interaction (FSI) and Conjugate Heat Transfer (CHT) applications, or auxiliary fields, for generic data exchange.
    - Specifying the Data Exchange Frequency
      In steady simulations, you specify the frequency at which data is exchanged in terms of the solver iterations. In transient simulations that use the implicit coupling scheme, you specify the exchange frequency in terms of the solver inner iterations. In transient simulations that use the explicit coupling scheme, you specify a time interval.
    - Specifying Boundary Conditions on Uncoupled Faces
      At a coupled boundary, you define boundary conditions using the data imported from the partner simulation. However, if the coupled boundaries are only partially in contact, or have very different meshes, not all the faces on a coupled boundary mesh are successfully matched with faces on the partner boundary mesh. For these uncoupled faces, which do not participate in the co-simulation, you can define independent boundary conditions.
    - Running the Co-Simulation
      The following instructions outline the standard workflow for running a co-simulation. With a standard run, the co-simulation solver automatically executes the steps that are required in a co-simulation.
      - Executing the Co-Simulation Steps Manually
        The co-simulation solver automatically executes the steps that are required in a co-simulation. These steps include exchanging information with the partner simulation, importing the mesh from the partner simulation, and mapping solution data from the current mesh to the imported partner mesh. In order to give you full control on each co-simulation step, Simcenter STAR-CCM+ also allows you to execute each co-simulation step manually.
      - Running a Co-Simulation Using Resource Manager
        Resource manager is a command-line application that simplifies the process by which you run a co-simulation through the command line. The other option for running from the command-line is to use the Simcenter STAR-CCM+ batch client.
      - Running a Co-Simulation in Batch Mode
        One of the two options for running a co-simulation from the command line is to use the Simcenter STAR-CCM+ batch client. When you using this option, you must specify the number of processors for both the leading simulation and the partner simulation.
      - Restarting the Co-Simulation
        You can run a co-simulation in multiple stages. Simcenter STAR-CCM+ co-simulation supports most of the common restart scenarios, providing that the partner simulations were in a consistent state when the co-simulation stopped.
  - Simcenter STAR-CCM+ Co-Simulation Models Reference
    The Simcenter STAR-CCM+ co-simulation models allow you to couple two Simcenter STAR-CCM+ simulations in a co-simulation analysis.
  - Uncoupled Mesh Entities Treatment Model Reference
    The Uncoupled Mesh Entities Treatment model allows you to set independent boundary conditions for the faces, on the coupled boundary mesh, that are not successfully matched with faces on the partner simulation mesh.
- Simcenter Nastran Co-Simulation
  For fluid-structure interaction (FSI) analyses, you can couple Simcenter STAR-CCM+ and Simcenter Nastran in a co-simulation analysis.
- Simcenter Amesim Co-Simulation
  Simcenter STAR-CCM+ allows for two-way co-simulation with Simcenter Amesim, which is used for modeling dynamic systems.
- FMU Co-Simulation
  Simcenter STAR-CCM+ allows you to import Functional Mock-up Unit (FMU) models for co-simulation. An FMU is a time-dependent model, typically representing a dynamic network, that is written according to the Functional Mock-up Interface (FMI) standard. The FMI standard is a software-independent standard that provides an interface for coupling simulation software.
- Abaqus Co-Simulation
  The co-simulation technique can be used to solve complex fluid-structure interaction (FSI) problems by coupling Abaqus and Simcenter STAR-CCM+. Mechanical and/or thermal fields can be exchanged across the fluid-structure interface.
- GT-SUITE Co-Simulation
  Simcenter STAR-CCM+ allows for two-way co-simulation with GT-SUITE, a multiphysics simulation tool from Gamma Technologies. GT-SUITE provides a modeling framework for the design and analysis of engineering systems, such as engines, vehicles, and thermal-hydraulic networks.
- Reacting Channel Coupling
  The Reacting Channel Coupling feature provides the ability for exchange of data between three-dimensional Simcenter STAR-CCM+ and the one-dimensional Plug Flow Reactor which uses the CVODE solver. You can use the Reacting Channel co-simulation model in Simcenter STAR-CCM+ to solve reacting flow simulations in tubular heat exchangers with channels that are long and thin.
- Generic Launcher
  Simcenter STAR-CCM+ provides a generic launcher for external applications that allows you to launch any application or file at a specified time interval during a simulation.
- Co-Simulation API
  Simcenter STAR-CCM+ provides an Application Programming Interface (API) that allows you to write partner code that exchanges data with a running Simcenter STAR-CCM+ simulation. As the partner code can be part of any other application that supports linking to a flat C library, the co-simulation API extends the range of co-simulation scenarios possible with Simcenter STAR-CCM+.
- Data Mappers
  In Simcenter STAR-CCM+, data mappers allow you to interpolate field data available either on a source mesh or on a source table to a target mesh representation, so that the mapped fields can be used for applying boundary or volume conditions on the target mesh.
- Coordinate Cell Clustering
  Simcenter STAR-CCM+ allows you to group mesh cells into clusters, based on their position with respect to a specified coordinate system, and provides a field index for querying values based on cluster. You can create threshold reports based on these clusters of cells.

Restarting the Co-Simulation

You can run a co-simulation in multiple stages. Simcenter STAR-CCM+ co-simulation supports most of the common restart scenarios, providing that the partner simulations were in a consistent state when the co-simulation stopped.

When running a co-simulation in multiple stages, the Disconnect Option allows you to specify whether the simulations stay connected at the end of a run. At the end of a run, you can modify the settings of both or one of the simulations and then restart the co-simulation.

Note	Do not change any properties while the co-simulation is running. Any discrepancy in the settings can break the synchronization between the coupled simulations.

To restart a co-simulation:

If one or both simulations are in an inconsistent state, either clear the solution in both simulations, or step each simulation until both reach a consistent state.
In both or one of the simulations, change the settings as required.
Changes to the regions layout, such as combining regions in both or one of the simulations, are not supported in restart scenarios.

To restart the co-simulation:

Press (Run) in one of the simulations.
If a synchronization problem occurs, clear the solution in both simulations and then press Run.