Home
Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
Discrete Element Method
The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
Cylindrical Particles in a Rotating Drum
This tutorial simulates a large number of cylindrical-shaped tablets tumbling in a rotating drum and being sprayed with a protective coating.
Running the Coating Spray Simulation
The simulation is now ready to be run to determine the residence time of the tablets within the spray zone.

Share

Link: copied

Breadcrumb: copied

Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
- Using Tutorial Macros and Files
  Macros, input files, and final simulation files for a range of tutorials are provided as an optional download package on the Support Center website. These macros and final simulation files are provided as an aid to the written tutorials, so that you can check your final results against the downloaded files, or against a simulation that is built and run using the macros.
- Introduction
  Welcome to the Simcenter STAR-CCM+ introductory tutorial. In this tutorial, you explore the important concepts and workflow. Complete this tutorial before attempting any others.
- Foundation Tutorials
  The foundation tutorials showcase the major features of Simcenter STAR-CCM+ in a series of short tutorials.
- Geometry
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for creating and working with parts and 3D-CAD.
- Mesh
  The tutorials in this set illustrate various STAR-CCM+ features for building CFD meshes.
- Incompressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
- Compressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for compressible fluid flows as well as harmonic balance.
- Heat Transfer and Radiation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for heat transfer, radiation, and thermal comfort.
- Multiphase Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating multiphase fluid flow problems
- Discrete Element Method
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
  - DEM Particles in a Conveyor
    The purpose of this tutorial is to provide a guide to setting up a simulation using the Discrete Element Method.
  - DEM Particle Settling
    This tutorial simulates a three-dimensional solid flow through a model blast furnace to predict the formation of the deadman region at the base of the furnace.
  - Cylindrical Particles in a Rotating Drum
    This tutorial simulates a large number of cylindrical-shaped tablets tumbling in a rotating drum and being sprayed with a protective coating.
    - Prerequisites
      The instructions in this tutorial assume that you are already familiar with certain techniques in Simcenter STAR-CCM+.
    - Load the Base Simulation
      A base simulation file has been prepared for this simulation. Continue by loading the base simulation file and saving it under a different file name.
    - Selecting the Physics Models
      Select the physics models required to define the behavior of the multiphase continuum.
    - Defining Lagrangian Phases
      A Lagrangian phase is used to define the solid particles in the simulation. The phase requires specific models and properties to characterize its behavior. In this case, the solid particles are cylindrical tablets, with the material properties set by the user. In a later step, you define interactions between tablets and the mixer walls and between other tablets.
    - Defining DEM Particle Interactions
      The DEM particle interactions define how the particles behave when they collide with one another and with the drum walls.
    - Setting the Rotating Drum Wall Condition
      Define the rotational velocity of the drum wall.
    - Creating an Injector
      Create an injector to deliver the tablets into the drum at the beginning of the simulation.
    - Setting the Solver Parameters and Stopping Criteria
      Set the solver time-step and elapsed time.
    - Setting Up a Visualization Scene
      Set up the Scalar Drum Scene in preparation for display of the tablets.
    - Running the Injection Simulation
      The simulation is now ready to be run.
    - Visualizing the Results of the Injection
      View the results of the initial simulation.
    - Initiate the Passive Scalar Spray
      Set up and activate the passive scalar used to represent the amount of coating that is sprayed onto the tablets.
    - Setting the Stopping Criteria and the Solution History File
      Resume the simulation and set the maximum time to ten seconds. Create a solution history file to record the particle (tablet) velocities and the Spray Residence Time
    - Running the Coating Spray Simulation
      The simulation is now ready to be run to determine the residence time of the tablets within the spray zone.
    - Summary
      This tutorial simulates the injection of cylindrical particles (tablets) into a rotating drum and being coated by a conical spray.
  - Arbitrarily Shaped Particles: DEM Polyhedra
    This tutorial demonstrates how to compose and inject DEM particles of an arbitrary shape.
  - Meshfree DEM: Excavator
    For DEM simulations of particles that are not significantly impacted by the surrounding fluid, Simcenter STAR-CCM+ allows you to model the particle behavior without requiring a volume mesh. This type of simulation is known as meshfree DEM.
  - Coarse Grain Particles: Fluidized Bed
  - Flexible Fiber Model: Lawnmower
- Motion
  The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
- Reacting Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating reacting flows such as combustion.
- Solid Stress
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for computing deformation, strain, and stresses in solid regions. They also show how such computations can be coupled to the fluid behavior in an analysis of fluid-structure interaction.
- Aeroacoustics
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for solving aeroacoustic simulations.
- Electromagnetism
  The following tutorials illustrate features for solving problems that involve electromagnetic fields.
- Electrochemistry
  The following tutorial demonstrates chemical reactions induced by an electrical current.
- Battery
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for setting up a battery model:
- Automation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
- Design Exploration
  The tutorials in this set illustrate various features for running design exploration studies in Design Manager.
- Coupling with CAE Codes
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
- Analysis Methods
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for analysing and visualizing simulation data.
- Simcenter STAR-CCM+ In-cylinder
  The tutorials in this set illustrate features for simulating internal combustion engines in Simcenter STAR-CCM+ using the dedicated add-on Simcenter STAR-CCM+ In-cylinder.

Running the Coating Spray Simulation

The simulation is now ready to be run to determine the residence time of the tablets within the spray zone.

First, update the scalar scene so that residence time is shown for the tablets:

Select Scenes > Scalar Scene Drum > Tablets > Scalar Field and set Function to Particle > Spray Residence Time.

Now run the simulation:

Click (Run) in the Solution toolbar.
The simulation rotates the drum for a further seven seconds, passing particles through the spray. This spray 'coats' the particles by assigning a passive scalar value. The residence time of each individual tablet is indicated by the color change and the range of residence time is given in the scale to the right of the scene.
Running the simulation takes approximately five hours on a workstation with eight processors.

You can monitor the iterative progress in the Output window. The scalar scene displays the tablets tumbling in the drum. The residence time increments each time a tablet passes through the conical volume of the spray.

When the solution is complete, the following message is displayed in the Output window: Stopping criterion Maximum Physical Time satisfied.

The final scalar scene should resemble the screenshot below.

Note	Simcenter STAR-CCM+ does not produce exactly the same image owing to the random injection algorithm which affects the initial conditions.

Save the simulation.