Home
Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
Automation
The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
Simple Java Macros: Post-Processing Objects
This tutorial is intended to demonstrate the steps required in recording, editing, and replaying a Java macro in Simcenter STAR-CCM+.
Summary
This tutorial has introduced the following Simcenter STAR-CCM+ features:

Link: copied

Breadcrumb: copied

Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
- Using Tutorial Macros and Files
  Macros, input files, and final simulation files for a range of tutorials are provided as an optional download package on the Support Center website. These macros and final simulation files are provided as an aid to the written tutorials, so that you can check your final results against the downloaded files, or against a simulation that is built and run using the macros.
- Introduction
  Welcome to the Simcenter STAR-CCM+ introductory tutorial. In this tutorial, you explore the important concepts and workflow. Complete this tutorial before attempting any others.
- Foundation Tutorials
  The foundation tutorials showcase the major features of Simcenter STAR-CCM+ in a series of short tutorials.
- Geometry
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for creating and working with parts and 3D-CAD.
- Mesh
  The tutorials in this set illustrate various STAR-CCM+ features for building CFD meshes.
- Incompressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
- Compressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for compressible fluid flows as well as harmonic balance.
- Heat Transfer and Radiation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for heat transfer, radiation, and thermal comfort.
- Multiphase Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating multiphase fluid flow problems
- Discrete Element Method
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
- Motion
  The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
- Reacting Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating reacting flows such as combustion.
- Solid Stress
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for computing deformation, strain, and stresses in solid regions. They also show how such computations can be coupled to the fluid behavior in an analysis of fluid-structure interaction.
- Aeroacoustics
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for solving aeroacoustic simulations.
- Electromagnetism
  The following tutorials illustrate features for solving problems that involve electromagnetic fields.
- Electrochemistry
  The following tutorial demonstrates chemical reactions induced by an electrical current.
- Battery
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for setting up a battery model:
- Automation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
  - Simulation Assistant: Internal Flow Assistant
    The Simulation Assistant provides you with an API framework that allows you to create workflows.
  - Simple Java Macros: Post-Processing Objects
    This tutorial is intended to demonstrate the steps required in recording, editing, and replaying a Java macro in Simcenter STAR-CCM+.
    - Prerequisites
      The instructions in the Simple Java Macros tutorial assume that you are already familiar with certain techniques in Simcenter STAR-CCM+.
    - Importing the Volume Mesh
      To set up the Simcenter STAR-CCM+ simulation, launch a simulation and import the supplied volume mesh.
    - Converting the Mesh to Two-Dimensions
      Simcenter STAR-CCM+ can use the surface of a three-dimensional mesh to create a two-dimensional mesh if the surface to be used lies on the X-Y plane at Z = 0.
    - Selecting the Physics Models
      Physics models define the physical variables and phenomena in the simulation. An incompressible isothermal turbulent flow is sufficient for this analysis. Use the segregated flow model with the k-omega turbulence model.
    - Setting Boundary Conditions and Values
      Specify a constant velocity in the X direction at the inlet, and a constant pressure at the outlet. Set the centerline boundary to be of type axis. This axis boundary must lie exactly on the Y = 0 line; project the axis to the appropriate plane.
    - Setting Stopping Criteria
      Set the stopping criteria for the simulation. By default, simulations are set to stop after 1000 iterations.
    - Visualizing the Simulation
      Create a scalar scene to display the pressure field as the solution develops.
    - Running the Simulation
    - Recording a Macro
      Create a macro to generate line probes at equally spaced intervals along the axis of the venturi tube. This enables you to extract profiles of axial velocity that can be used to observe the recovery of the flow after the venturi section.
    - Editing the Macro
      Examine the recorded macro to identify where you can insert a loop for the creation of multiple line probes.
    - Reviewing the Edited Macro
    - Running the Macro
      Run the macro in the Simcenter STAR-CCM+ client.
    - Plotting Data Using Line Probes
      Use the line probes to create an X-Y plot of axial velocity profiles. Each data series presented on the plot corresponds to the data extracted along a single-line probe. The data contained in the plot are exported to a text file.
    - Exporting XY Plot Data
      The data contained in the Velocity Profiles plot can be exported to a text file.
    - Further Training
    - Summary
      This tutorial has introduced the following Simcenter STAR-CCM+ features:
  - Intermediate Java Macros: Run Multiple Simulations
    This tutorial simulates a train in a cross-wind, to calculate the drag coefficient on the train for different angles of attack.
  - Simulation Templates: HVAC Duct
    In Simcenter STAR-CCM+, simulation templates define a starting point for simulations with similar physics. A simulation template can include a variety of predefined objects, such as predefined simulation operations, mesh operations, tags, filters, and parameters. Using a simulation template helps to automate and speed up the simulation preparation process.
- Design Exploration
  The tutorials in this set illustrate various features for running design exploration studies in Design Manager.
- Coupling with CAE Codes
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
- Analysis Methods
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for analysing and visualizing simulation data.
- Simcenter STAR-CCM+ In-cylinder
  The tutorials in this set illustrate features for simulating internal combustion engines in Simcenter STAR-CCM+ using the dedicated add-on Simcenter STAR-CCM+ In-cylinder.

Summary

This tutorial has introduced the following Simcenter STAR-CCM+ features:

Importing a three-dimensional mesh intended for use in a two-dimensional simulation.
Converting a three-dimensional mesh to two-dimensions.
Cleaning up regions and boundaries after the conversion.
Splitting a boundary by angle and renaming the subsequent nodes.
Selecting the axisymmetric space model.
Setting an axial boundary type and projecting it to the Y axis.
Recording a macro while creating a single-line probe and adding it to a scalar scene.
Editing a previously recorded macro to add a loop.
Including code to add all derived parts to a scalar scene.
Running a macro.
Creating an XY plot based on line probes.
Exporting the data from an XY plot to a CSV file.