Home
Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
Incompressible Flow
The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
Steady Flow: Lid-Driven Cavity Flow
This tutorial demonstrates the performance of Simcenter STAR-CCM+ in solving a traditional square lid-driven cavity flow. The problem geometry consists of a two-dimensional 1 m² cavity. The cavity is covered by an impermeable wall that moves in the x-direction with constant velocity of 1 m/s. A stretched quadrilateral mesh with 6400 cells is used.
Initializing and Running the Simulation
Initialize the solution and run the analysis.

Link: copied

Breadcrumb: copied

Tutorials
Tutorials show you how to use Simcenter STAR-CCM+ for various applications in a step-by-step format with recommendations for setup, initialization and steps of the solution process specific to the application. Macro and simulation files are available for download for a large proportion of cases.
- Using Tutorial Macros and Files
  Macros, input files, and final simulation files for a range of tutorials are provided as an optional download package on the Support Center website. These macros and final simulation files are provided as an aid to the written tutorials, so that you can check your final results against the downloaded files, or against a simulation that is built and run using the macros.
- Introduction
  Welcome to the Simcenter STAR-CCM+ introductory tutorial. In this tutorial, you explore the important concepts and workflow. Complete this tutorial before attempting any others.
- Foundation Tutorials
  The foundation tutorials showcase the major features of Simcenter STAR-CCM+ in a series of short tutorials.
- Geometry
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for creating and working with parts and 3D-CAD.
- Mesh
  The tutorials in this set illustrate various STAR-CCM+ features for building CFD meshes.
- Incompressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for incompressible fluid flows as well as porosity and solution recording
  - Steady Flow: Lid-Driven Cavity Flow
    This tutorial demonstrates the performance of Simcenter STAR-CCM+ in solving a traditional square lid-driven cavity flow. The problem geometry consists of a two-dimensional 1 m² cavity. The cavity is covered by an impermeable wall that moves in the x-direction with constant velocity of 1 m/s. A stretched quadrilateral mesh with 6400 cells is used.
    - Importing the Mesh and Naming the Simulation
      Create a new simulation and set up the mesh.
    - Visualizing the Imported Mesh
      View the imported mesh, and access various parts that are contained in the region.
    - Setting Up the Physics Models
      The default continuum (Physics 1) is edited so that the appropriate physical models for the simulation are selected.
    - Setting Fluid Properties
      Set the density and dynamic viscosity fluid properties.
    - Setting Boundary Conditions and Values
      This problem requires only two boundary conditions: moving and stationary. In Simcenter STAR-CCM+, it is possible to combine two or more boundaries into one.
    - Visualizing the Solution
      Post-processing scenes can be updated every iteration (or time-step) in Simcenter STAR-CCM+. This allows for dynamic monitoring of various quantities, such as the velocity that you want to visualize in this tutorial. A vector scene is therefore created before running.
    - Setting Up Lines for Plotting
      Data are plotted for both the U- and V-velocity profiles along line probes passing through the center of the cavity.
    - Plotting Simulation Data
      This part of the tutorial produces the plots of the U- and V-velocity profiles. In a subsequent step, experimental data are imported from files and plotted alongside the numerical data. The development of the solution can be observed throughout the run by viewing these plots.
    - Plotting Reference Data
      To compare the experimental velocity data with the velocity plots, it is necessary to import the data in supplied files into Simcenter STAR-CCM+ tables.
    - Preparing Solver Parameters and Stopping Criteria
      Before running the analysis, look at the velocity solver, as well as the maximum number of iterations to be performed.
    - Initializing and Running the Simulation
      Initialize the solution and run the analysis.
    - Analyzing the Results
      Once the calculations are finished, the displays show the results based on the pre-processing settings.
    - Summary
      This tutorial solved a traditional square lid-driven cavity flow.
    - Bibliography
  - Steady Flow: Channel Flow with Multiple Meshes
    This tutorial describes a steady airflow simulation over an obstacle that is mounted at the bottom wall of a three-dimensional channel.
  - Steady Flow: Laminar and Turbulent Flow in an S-Bend
    This tutorial demonstrates the flow of an incompressible gas through an s-bend of constant diameter (2 cm), for both laminar and turbulent flow. The first part of the tutorial covers the laminar flow, with a Reynolds number (Re) of 500, and the second part covers the turbulent flow, Re = 50,000. The same pipe geometry is used in both cases.
  - Steady Flow: Backward Facing Step
    Steady flow over a backward facing step is a typical scenario to investigate the behaviour of reattaching flows. Understanding the behaviour of the flow is crucial for many applications such as designing heat exhangers, evalutating aerodynamic performance and improving flow control strategies.
  - Anisotropic Flow: Cyclone Separator
    The flow inside a cyclone separator is characterised by strong swirling motion and three-dimensional boundary layers. Properly accounting for these effects is a challenging problem for CFD simulations. This tutorial presents the initial step in setting up a coarse mesh cyclone flow simulation.
  - Porous Resistance: Isotropic Media
    This tutorial models flow through a catalyst geometry.
  - Porous Resistance: Orthotropic Media
    This tutorial solves the same problem as the Porous Resistance: Isotropic Media, except that the fluid in the porous region cannot flow in any direction other than the bulk flow (y-) direction.
  - Solution Recording and Playback: Vortex Shedding
    This tutorial demonstrates how to use the solution recording and playback module for capturing the results of transient phenomena.
  - Generalized Newtonian Fluid: Flow in a Static Mixer
    This tutorial demonstrates the process of setting up and analyzing the flow of a viscous fluid through a static mixer.
  - Viscoelastic Flow: Basic Extrusion
    This tutorial illustrates the extrusion of molten rubber through a die.
  - Material Calibration: Curve Fitting Non-Newtonian Model Parameters
    This tutorial illustrates the workflow for calibrating rheological model parameters from experimental rheological data through curve-fitting.
  - Polymer Melt Extrusion: Film Casting
    In industry, film casting is a common process for producing thin polymeric films. Cast films are used for applications such as food and textile packaging, stretch wraps, or plastic bags. Simcenter STAR-CCM+ provides a combination of the Film Casting model and the Free Surface model that allows you to simulate that process and to investigate the impact of various parameters on the resulting film.
- Compressible Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for compressible fluid flows as well as harmonic balance.
- Heat Transfer and Radiation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for heat transfer, radiation, and thermal comfort.
- Multiphase Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating multiphase fluid flow problems
- Discrete Element Method
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating Discrete Element Method problems
- Motion
  The tutorials in this set illustrate various STAR-CCM+ features for simulating problems with moving geometries and meshes, dynamic fluid body interaction, and rigid body motion:
- Reacting Flow
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for simulating reacting flows such as combustion.
- Solid Stress
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for computing deformation, strain, and stresses in solid regions. They also show how such computations can be coupled to the fluid behavior in an analysis of fluid-structure interaction.
- Aeroacoustics
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for solving aeroacoustic simulations.
- Electromagnetism
  The following tutorials illustrate features for solving problems that involve electromagnetic fields.
- Electrochemistry
  The following tutorial demonstrates chemical reactions induced by an electrical current.
- Battery
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for setting up a battery model:
- Automation
  The tutorials in this set illustrate various Simcenter STAR-CCM+ automation and macro features.
- Design Exploration
  The tutorials in this set illustrate various features for running design exploration studies in Design Manager.
- Coupling with CAE Codes
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for coupling with CAE codes:
- Analysis Methods
  The tutorials in this set illustrate various Simcenter STAR-CCM+ features for analysing and visualizing simulation data.
- Simcenter STAR-CCM+ In-cylinder
  The tutorials in this set illustrate features for simulating internal combustion engines in Simcenter STAR-CCM+ using the dedicated add-on Simcenter STAR-CCM+ In-cylinder.

Initializing and Running the Simulation

Initialize the solution and run the analysis.

Use the following steps:

Click (Initialize Solution) in the Solution toolbar or use the Solution > Initialize Solution menu item. The initial zero velocity condition is shown in the plot displays.
Click (Run) in the Solution toolbar to run the analysis.

The Residuals display is created automatically and shows the progress of the solver. If necessary, click the Residuals tab to bring the Residuals plot into view. An example of a residual plot is shown in a separate part of the User Guide.

During the run, it is possible to stop the process by clicking (Stop) in the toolbar. The simulation can be continued later by clicking (Run). If left alone, the simulation continues until the stopping criteria are satisfied.
After the run is finished, save the simulation.