Home
Theory
Simcenter STAR-CCM+ simulations are built on numerical algorithms that solve relevant laws of physics according to the conditions that the simulation defines. So that you can identify the physical laws, and understand the methods by which they are solved, Simcenter STAR-CCM+ comes with a Theory Guide.
Turbulence
Reynolds-Averaged Navier-Stokes (RANS) Turbulence Models
RANS turbulence models provide closure relations for the Reynolds-Averaged Navier-Stokes equations, that govern the transport of the mean flow quantities.
Eddy Viscosity Models
Eddy viscosity models are based on the analogy between the molecular gradient-diffusion process and turbulent motion.
K-Omega Model
The K-Omega turbulence model is a two-equation model that solves transport equations for the turbulent kinetic energy $k$ and the specific dissipation rate $ω$ —the dissipation rate per unit turbulent kinetic energy ( $ω \propto ε / k$ )—in order to determine the turbulent eddy viscosity.
Vortex Stretching Modification

Share

Link: copied

Breadcrumb: copied

Theory
Simcenter STAR-CCM+ simulations are built on numerical algorithms that solve relevant laws of physics according to the conditions that the simulation defines. So that you can identify the physical laws, and understand the methods by which they are solved, Simcenter STAR-CCM+ comes with a Theory Guide.
- Fundamental Equations
  Simcenter STAR-CCM+ models a range of physics phenomena including fluid mechanics, solid mechanics, heat transfer, electromagnetism, and chemical reactions. On a macroscopic scale, where the typical lengths are much greater than the inter-atomic distances, the discrete structure of matter can be neglected and materials can be modeled as continua. The mathematical models that describe the physics of continua are derived from fundamental laws that express conservation principles.
- Fluid Flow
  Simcenter STAR-CCM+ can simulate internal and external fluid flow across a wide range of flow regimes, and for a variety of fluid types. It solves the conservation equations for mass, momentum, and energy for general incompressible and compressible fluid flows.
- Numerical Flow Solution
  In the finite volume method, the solution domain is subdivided into a finite number of small control volumes, corresponding to the cells of a computational grid.
- Turbulence
  - Velocity Gradient and Invariants
    In the context of turbulence modelling, it is useful to define a number of quantities (scalars and tensors) related to the velocity gradient.
  - Non-Dimensional Quantities
  - Reynolds-Averaged Navier-Stokes (RANS) Turbulence Models
    RANS turbulence models provide closure relations for the Reynolds-Averaged Navier-Stokes equations, that govern the transport of the mean flow quantities.
    - Eddy Viscosity Models
      Eddy viscosity models are based on the analogy between the molecular gradient-diffusion process and turbulent motion.
      - Spalart-Allmaras Model
        The Spalart-Allmaras turbulence model solves a transport equation for the modified diffusivity $\tilde{ν}$ in order to determine the turbulent eddy viscosity.
      - K-Epsilon Model
        The K-Epsilon turbulence model is a two-equation model that solves transport equations for the turbulent kinetic energy $k$ and the turbulent dissipation rate $ε$ in order to determine the turbulent eddy viscosity.
      - K-Omega Model
        The K-Omega turbulence model is a two-equation model that solves transport equations for the turbulent kinetic energy $k$ and the specific dissipation rate $ω$ —the dissipation rate per unit turbulent kinetic energy ( $ω \propto ε / k$ )—in order to determine the turbulent eddy viscosity.
        Free-Shear Modification
        For flows that are dominated by free-shear layers (such as jets or mixing layers) or when free-stream turbulence is high, the Standard K-Omega model tends to underpredict the production of $ω$ . Free-shear modifications are designed to counteract this effect.
        Vortex Stretching Modification
        Low Reynolds Number Modification
        The low Reynolds number modification can be used to account for low Reynolds number and transitional effects.
        Constitutive Relations
        Constitutive relations describe the relation between the stress tensor and the mean strain rate that is used in the Boussinesq approximation.
        Compressibility Correction
        Most turbulence models are derived based on incompressible flow assumptions. However, at high Mach number density variations affect the structures of turbulent flow and corrections must be introduced.
      - Elliptic Blending Model
        The Elliptic Blending turbulence model solves transport equations for the turbulent kinetic energy $k$ , the turbulent dissipation rate $ε$ , the normalized (reduced) wall-normal stress component $φ = \bar{ϑ^{2}} / k$ , and the elliptic blending factor $α$ in order to determine the turbulent eddy viscosity.
      - Curvature Correction
      - Turbulent Viscosity User Scaling
        The Turbulent Viscosity User Scaling model allows you to scale the turbulent viscosity for both K-Epsilon and K-Omega turbulence models.
      - Scale-Resolving Hybrid (SRH) Model
        The Scale-Resolving Hybrid (SRH) turbulence model is a continuous hybrid RANS-LES model that combines the accurate prediction capabilities of LES with the low numerical cost of RANS.
    - Reynolds Stress Transport (RST) Models
      Reynolds Stress Transport (RST) models, also known as second-moment closure models, directly calculate the components of the Reynolds stress tensor by solving their governing transport equations.
    - RANS Turbulent Heat Transfer
      For RANS turbulence models, the definition of the mean heat flux in the energy equation is based on a Boussinesq approximation. For the SKE LRe model, Simcenter STAR-CCM+ provides the Temperature Flux model, which replaces the Boussinesq approximation by an algebraic formulation for the turbulent heat flux.
    - RANS Boundary, Region, and Initial Conditions
  - Scale-Resolving Simulations
    In contrast to RANS models, scale-resolving simulations resolve the large scales of turbulence and model small-scale motions.
  - Turbulent Time, Length, and Velocity Scales
    Turbulent time, length, and velocity scales are approximate scales that are used to define model parameters. The Kolmogorov and Taylor scales provide information about the local limits for LES/DES meshes.
  - Turbulence Bibliography
- Transition
  The term transition refers to the phenomenon of laminar to turbulence transition in boundary layers. A transition model in combination with a turbulence model predicts the onset of transition in a turbulent boundary layer.
- Wall Treatment
  Walls are a source of vorticity in most flow problems of practical importance. Therefore, an accurate prediction of the flow across the wall boundary layer is essential.
- Wall Distance
  Wall distance is a parameter that represents the distance from a cell centroid to the nearest wall face with a non-slip boundary condition. Various physical models require this parameter to account for near-wall effects.
- Heat Transfer
  Heat transfer is the exchange of thermal energy between media at different temperatures. Heat transfers from locations of high temperature to locations of low temperature in order to reach an equilibrium state. The three main mechanisms of heat transfer are: conduction, convection, and radiation.
- Porous Media
  Porous media are continua that contain both fluid and fine-scale solid structures, for example: packed-bed chemical reactors, filters, radiators, honeycomb structures, or fibrous materials. The solid geometrical structures are too fine to be individually meshed and fully resolved by a computational grid.
- Species and Passive Scalars
  Simcenter STAR-CCM+ models the transport, the mixing, and the chemical reactions of multi-component liquids or multi-component gases by solving conservation equations for scalar variables that represent the mass fraction of each species in the mixture. This conservation equation allows for convection, diffusion, and optional source effects, and is solved in addition to the global mass continuity equation.
- Multiphase—Eulerian Approach
  Multiphase flows, where several fluids flow in the domain of interest, play an important role in variety of industrial applications. In general, we associate phases with gases, liquids or solids and as such some simple examples of multiphase flows are: air bubbles rising in a glass of water, sand particles carried by wind, rain drops in air. The definition of phase can be generalized and applied to other fluid characteristics such as size, shape, density, and temperature.
- Multiphase—Lagrangian Approach
  Multiphase flows are found in a wide variety of industrial processes, some examples of which are internal combustion engines, liquid, or solid fueled combustors, spray driers, cyclone dust separators, and chemical reactors. Multiphase in this context refers to one thermodynamic phase, be it a solid, a liquid, or a gas, interacting with another distinct phase.
- Reacting Flow
  In reacting flows, chemical species mix with each other and react when conditions allow. To model these flows, Simcenter STAR-CCM+ couples species and energy transport equations with the chemistry solvers that compute the source terms.
- Internal Combustion Engines
  Numerical modeling of internal combustion engines plays an increasingly important role in improving engine design. CFD simulation of such engines can give a comprehensive insight into the wide-ranging physics of the device, such as turbulent mixing between fuel and air, the ignition, and combustion chemistry.
- Electrochemistry
  Electrochemistry is the discipline investigating relationships between electrical currents and chemical composition change in general.
- Plasma
  Plasma is a state of matter similar to a gas that is composed partially or completely of charged particles such as ions and electrons which are not bound to each other.
- Electromagnetism
  Many engineering applications, such as electric motors, electric switches, and transformers, involve electromagnetic phenomena. Electromagnetic phenomena can be modeled based on the classical theory of Electromagnetism, which describes the interaction between electrically charged particles in terms of electric fields, magnetic fields, and their mutual interaction.
- Batteries
- Solid Mechanics
  Solid Mechanics describes the behavior of a solid continuum in response to applied loads. Applied loads include body forces, surface loads, point forces, or thermal loads that result from changes in the solid temperature. Applied loads induce a stress field in the structure and can cause displacement of the structure—from an initial undeformed configuration to a deformed configuration.
- Aeroacoustics
  Computational aeroacoustics (CAA) is a branch of multiphysics modeling and simulation that involves identifying noise sources that are induced by fluid flow and propagation of the sound waves then generated.
- Finite Element Method
  The Finite Element method is a powerful tool for finding approximate solutions to continuous problems. The methodology is similar to other numerical techniques that approximate continuous partial differential equations with discrete algebraic equations.
- Mesh Motion
  In transient simulations, mesh motion is a numerical technique that allows you to update the position of the computational domain while the solvers run.
- 6-DOF Rigid Body Motion
  Simcenter STAR-CCM+ allows you to model the motion of a rigid body in response to applied forces and moments. In a rigid body, the relative distance between internal points does not change. Therefore, it is sufficient to solve the equations of motion for the center of mass of the body.
- Rotating Flow
  Rotating flow usually occurs in rotating machinery such as pumps, propellers, fans, wind turbines, and so on.
- Harmonic Balance
  Harmonic Balance equations describe periodic unsteady flows where the unsteady frequencies are known beforehand. They are suited to modeling periodically repeating flow fields that typically occur in turbomachinery such as compressors, turbines, and fans.
- Adjoint
  The adjoint method is an efficient means to predict the influence of many input parameters on some engineering quantities of interest in a simulation.
- Design Manager
  Design Manager provides an automated approach within Simcenter STAR-CCM+ to run design exploration studies. Design exploration covers both performance assessment and optimization.
- Scalars, Vectors, and Tensors
  Most physical quantities in Simcenter STAR-CCM+ are either scalars, vectors, or 2nd-order tensors.
- Solution Data Interpolation
  Many operations require interpolation of solution data between different sets of mesh points. For example, remeshing operations require interpolation of existing solution data onto a new mesh. Data interpolation also occurs at the interface between regions, where contacting boundaries exchange data. Additionally, configurable data mappers allow you to interpolate field functions and tabular data to specified meshes.
- Idealizations
  In many simulations, it is common practice to reduce the size of the computational domain using planes of symmetry, axes of rotation, periodicity, or by reducing the 3D domain to a 2D domain. However, when you calculate physical quantities using reports you generally want to account for the whole domain. You can obtain report values for the full model using idealizations.

Vortex Stretching Modification

Almost all two-equation models tend to predict a larger spreading rate for round jets than for plane jets, while the opposite effect is observed in experiments. The vortex-stretching modification is designed to overcome this round-jet/plane-jet anomaly [328]. In Simcenter STAR-CCM+, this modification is implemented for the Standard K-Omega model and is defined as follows:


Vortex-Stretching Modification	Formulation
Activated	$f_{β}$ is defined as follows: Figure 1. EQUATION_DISPLAY $f_{β} = \frac{1 + 70 χ_{ω}}{1 + 80 χ_{ω}}$ (1233) where: $χ_{ω} = \frac{(W ∙ W) : S}{{(β^{} ω)}^{3}}$ and: $S$ and $W$ are given by Eqn. (1130) and Eqn. (1132), respectively. $β^{}$ is a Model Coefficient. If the cross-diffusion limiter is activated, $f_{β}$ is defined as: Figure 2. EQUATION_DISPLAY $f_{β} = \frac{1 + 85 χ_{ω}}{1 + 100 χ_{ω}}$ (1234)
Deactivated	$f_{β}$ is set to unity.

The vortex-stretching modification is not available for the SST K-Omega model— $f_{β}$ is set to unity.