Home
Design Manager
Design Manager provides an automated approach within Simcenter STAR-CCM+ to run design exploration studies. Design exploration covers both performance assessment and optimization.
Design Manager Workflow
The following steps outline the recommended workflow to set up, run, and post-process a design study in Design Manager.
Creating a Design Manager Project
The process for creating a Design Manager project is integrated within the same user interface as you use for a Simcenter STAR-CCM+ simulation.
Setting Up Simulation Effect for Simulation Parameters
The Simulation Effect of a simulation parameter indicates how the parameter affects the simulation. To optimize the design exploration process, where two or more designs have the same Geometry and Meshing parameters, the mesh is computed only once and then reused for all of the similar designs. The mesh is cached and reloaded when required, instead of being computed repeatedly.

Share

Link: copied

Breadcrumb: copied

Design Manager
Design Manager provides an automated approach within Simcenter STAR-CCM+ to run design exploration studies. Design exploration covers both performance assessment and optimization.
- Study Inputs
  In Design Manager, study inputs are parameters that you define in the reference simulation and that Design Manager can modify during design studies.
- Study Outputs
  For each design simulation in a design study, Design Manager allows you to record and write specific outputs.
- Surrogate Models
  In Design Manager, a surrogate is a predictive function that returns an estimated response value for a given set of numerical input parameters. Design Manager computes surrogate functions by fitting data from design study simulations to chosen surrogate models such as Kriging or Least Squares.
- Study Types
  Design Manager offers several types of design study by which you can explore the design space of your product.
- Study Runs
  Design Manager allows you to run design studies on your local workstation or on a high performance cluster. You can run the design simulations sequentially or concurrently, in serial or in parallel. In addition, you can customize the simulation run by inserting Java macros that contain additional setup for the simulation. Design Manager optimizes runs by caching meshes and reusing them where possible.
- Study Analysis
  Design Manager provides post-processing capabilities by which you can analyze the outputs of a design study.
- Design Manager Licensing
  The licenses that are required for running a design study in Design Manager depend on the type of study and the specified run settings. Also, different steps within the Design Manager workflow have particular license requirements.
- Design Manager Workflow
  The following steps outline the recommended workflow to set up, run, and post-process a design study in Design Manager.
  - Setting Up the Reference Simulation
    Every design study requires a reference simulation from which to start. In this reference simulation you create and expose the design and global parameters by which Design Manager can modify the simulation setup. You also prepare reports, plots, and scenes for feedback and analysis.
  - Creating a Design Manager Project
    The process for creating a Design Manager project is integrated within the same user interface as you use for a Simcenter STAR-CCM+ simulation.
    - Saving, Closing, and Loading a Design Manager Project
      The Design Manager project settings are stored in a separate file, called Design Manager project file (*.dmprj).
    - Updating a Design Manager Project
      As you set up a design study, you are likely to find that you require other parameters, reports, scenes, or plots from the reference simulation. You can not create these object in the Design Manager project. Instead, you must go to the reference simulation directly.
    - Setting Up Simulation Effect for Simulation Parameters
      The Simulation Effect of a simulation parameter indicates how the parameter affects the simulation. To optimize the design exploration process, where two or more designs have the same Geometry and Meshing parameters, the mesh is computed only once and then reused for all of the similar designs. The mesh is cached and reloaded when required, instead of being computed repeatedly.
  - Setting Up a Design Study
    Setting up a design study requires that you choose the type of study, set its properties, and choose appropriate input parameters and responses. Additionally, you choose scenes and plots that you want Design Manager to export from each design simulation.
  - Running a Design Study
    Design Manager provides various settings to control the run of a design study and the compute resources to use.
  - Monitoring a Design Study
    In the GUI, you can check the progress of a running design study in the progress and status bar beneath the explorer window. You can also view post-processing objects while a design study runs, allowing you to view progress interactively.
  - Analyzing the Design Study Results
    Design Manager provides a number of post-processing elements by which you can examine the results of a design study. For each design study type, Design Manager gives you a pre-configured design study dashboard that contains the most relevant elements for the study type. Design study dashboards are built on the layout view mechanism within Simcenter STAR-CCM+.
  - Generating and Applying Surrogate Models
    A study runs significantly faster when you compute responses using surrogate models instead of simulations. In Design Manager, a typical application for surrogate models is a Robustness and Reliability study with a large number of sample points in the design space.
  - Analyzing the Design Study Results
    Design Manager provides a number of post-processing elements by which you can examine the results of a design study. For each design study type, Design Manager gives you a pre-configured design study dashboard that contains the most relevant elements for the study type. Design study dashboards are built on the layout view mechanism within Simcenter STAR-CCM+.
  - Launching Design Manager in Teamcenter
    Teamcenter is a product lifecycle management tool, in which you embed and monitor multidisciplinary development stages of a product—from geometry construction, flow analysis, thermal management to material selection. As part of design exploration, Teamcenter supports the creation, modification, and execution of design studies using Design Manager.
- Design Manager Reference
  The following properties and right-click actions are available for a Design Manager project.
- Troubleshooting Design Manager
  If you encounter problems when setting up or running a design study, check these common problem scenarios for advice on how to proceed.

Setting Up Simulation Effect for Simulation Parameters

The Simulation Effect of a simulation parameter indicates how the parameter affects the simulation. To optimize the design exploration process, where two or more designs have the same Geometry and Meshing parameters, the mesh is computed only once and then reused for all of the similar designs. The mesh is cached and reloaded when required, instead of being computed repeatedly.

If all of the simulation parameters affect meshing (that is, the Simulation Effect is set to Unknown, Geometry, or Meshing for every parameter), there is no possibility of reusing a mesh so caching is disabled.

In case of a mesh reuse, only the solve and result blocks are re-executed during a study run. See also: Study Runs.

Mesh reuse is available for the following design study types:

Sweep
DOE(2 Level and 3 Level only)
Manual

To set up Simulation Effect of a simulation parameter:

In the Design Manager Project file, select the Simulations > [reference simulation] > Parameters > Simulation Parameters > [simulation parameter] node and set Simulation Effect to one of the following types:

Unknown: Implies the parameter affects everything (that is, geometry, meshing, and solver).
Geometry: The parameter affects the geometry (which implies it also affects meshing and solver).
Meshing: The parameter affects meshing (which implies it also affects the solver).
Solver: The parameter affects the solver only.

When you load a reference simulation into a Design Manager project, by default, 3D-CAD and CAD Client parameters have Simulation Effect set to Geometry, and global parameters have Simulation Effect set to Unknown. You must modify this setting accordingly when you load the reference simulation. See Updating a Design Manager Project.

For Design Manager project files that were saved in Simcenter STAR-CCM+ version 2019.2 or earlier, the Simulation Effect is set to Unknown for all parameters. You can update the reference simulation to use the default settings (Simulation Effect resets to Geometry for 3D-CAD and CAD Client parameters), or edit the settings manually.