Home
Interacting with CAE Software
Simcenter STAR-CCM+ can interact with a wide range of other computer-aided engineering (CAE) software. This interaction includes import/export of mesh and solution data as well as coupling capabilities for multiphysics simulations.
File Import and Export
Simcenter STAR-CCM+ allows you to import mesh and solution data from other CAE packages using files. You can also export such data from Simcenter STAR-CCM+ for use in external software.
gPROMS File Export
Simcenter STAR-CCM+ allows you to export solution data to gPROMS, a process modeling platform for the simulation of complex systems. In general, the gPROMS model consists of a multizonal network model that performs process calculations. Simcenter STAR-CCM+ provides the flow solution.
gPROMS File Export Workflow
This workflow provides steps for exporting data to gPROMS. The workflow assumes that your simulation is fully set up as required by your analysis.
Exporting Solution Data
Run the simulation to convergence and export the solution to a file.

Link: copied

Breadcrumb: copied

Interacting with CAE Software
Simcenter STAR-CCM+ can interact with a wide range of other computer-aided engineering (CAE) software. This interaction includes import/export of mesh and solution data as well as coupling capabilities for multiphysics simulations.
- File Import and Export
  Simcenter STAR-CCM+ allows you to import mesh and solution data from other CAE packages using files. You can also export such data from Simcenter STAR-CCM+ for use in external software.
  - CGNS File Import and Export
    Simcenter STAR-CCM+ allows for import or export of data through CGNS files. CGNS (CFD General Notation System) is a standard data format that can can contain both mesh and solution data.
  - Simcenter Data File Export (.scd5)
    Simcenter STAR-CCM+ can export mesh and solution data as a Simcenter Data File (.scd5), which is a standard file format based on HDF5 (Hierarchical Data Format, Version 5). This type of file export enables file-based coupling with Simcenter 3D.
  - gPROMS File Export
    Simcenter STAR-CCM+ allows you to export solution data to gPROMS, a process modeling platform for the simulation of complex systems. In general, the gPROMS model consists of a multizonal network model that performs process calculations. Simcenter STAR-CCM+ provides the flow solution.
    - gPROMS File Export Workflow
      This workflow provides steps for exporting data to gPROMS. The workflow assumes that your simulation is fully set up as required by your analysis.
      - Defining Cell Clusters
        To reproduce the internal zones defined in the gPROMS network model, you divide the Simcenter STAR-CCM+ mesh into cell clusters.
      - Activating Physics Models for File Export
        To export data to gPROMS, you require an additional physics continuum that represents the external application.
      - Defining the gPROMS Region and Boundaries
        To export data to gPROMS, you require a region that represents the external gPROMS network in the Simcenter STAR-CCM+ simulation. This region is associated with the external physics continuum.
      - Coupling the Regions and Boundaries
        Couple the Simcenter STAR-CCM+ fluid region and boundaries with the gPROMS region and boundaries.
      - Coupling Lagrangian Phases
        When you export data to gPROMS, you can include particle data from Lagrangian phases that are defined in the simulation.
      - Exporting Solution Data
        Run the simulation to convergence and export the solution to a file.
    - gPROMS Models Reference
      To export data to gPROMS, you require an additional physics continuum with the gPROMS Export model. For coupling of Lagrangian phases, you also require the Particle Clustering model.
  - Importing STAR-CD Data
    Simcenter STAR-CCM+ allows you to import mesh and solution data from STAR-CD, in order to post-process the STAR-CD solution data using the Simcenter STAR-CCM+ visualization tools. This import option does not support Lagrangian solution data.
  - Importing CAE Models
    Simcenter STAR-CCM+ allows you to import CAE models that have been prepared in other CAE products. You can use imported CAE models for coupling Simcenter STAR-CCM+ with external CAE codes using the file-based coupling technique.
- File-Based Coupling (through Imported CAE Model)
  File-based coupling is a method used to couple Simcenter STAR-CCM+ with another CAE code via external files stored in the computer memory.
- Rotor Blade Aeroelasticity
  Rotor Blade Aeroelasticity (RBA) simulations model the aerodynamic performance of elastic rotor blades using displacement and twist data from external files. You can create these data files in multi-body dynamics software such as RCAS, CAMRAD-II, DYMORE, and FLIGHTLAB. Typical RBA applications include urban air vehicle rotors, wind turbines, and helicopter rotors.
- Simcenter STAR-CCM+ to Simcenter STAR-CCM+ Co-Simulation
  Simcenter STAR-CCM+ allows you to couple two running simulations together in a co-simulation analysis. The Simcenter STAR-CCM+ to Simcenter STAR-CCM+ co-simulation capability targets analyses involving conjugate heat transfer (CHT), fluid-structure interaction (FSI), and exchange of any scalar or vector fields across the coupled boundaries or regions.
- Simcenter Nastran Co-Simulation
  For fluid-structure interaction (FSI) analyses, you can couple Simcenter STAR-CCM+ and Simcenter Nastran in a co-simulation analysis.
- Simcenter Amesim Co-Simulation
  Simcenter STAR-CCM+ allows for two-way co-simulation with Simcenter Amesim, which is used for modeling dynamic systems.
- FMU Co-Simulation
  Simcenter STAR-CCM+ allows you to import Functional Mock-up Unit (FMU) models for co-simulation. An FMU is a time-dependent model, typically representing a dynamic network, that is written according to the Functional Mock-up Interface (FMI) standard. The FMI standard is a software-independent standard that provides an interface for coupling simulation software.
- Abaqus Co-Simulation
  The co-simulation technique can be used to solve complex fluid-structure interaction (FSI) problems by coupling Abaqus and Simcenter STAR-CCM+. Mechanical and/or thermal fields can be exchanged across the fluid-structure interface.
- GT-SUITE Co-Simulation
  Simcenter STAR-CCM+ allows for two-way co-simulation with GT-SUITE, a multiphysics simulation tool from Gamma Technologies. GT-SUITE provides a modeling framework for the design and analysis of engineering systems, such as engines, vehicles, and thermal-hydraulic networks.
- Reacting Channel Coupling
  The Reacting Channel Coupling feature provides the ability for exchange of data between three-dimensional Simcenter STAR-CCM+ and the one-dimensional Plug Flow Reactor which uses the CVODE solver. You can use the Reacting Channel co-simulation model in Simcenter STAR-CCM+ to solve reacting flow simulations in tubular heat exchangers with channels that are long and thin.
- Generic Launcher
  Simcenter STAR-CCM+ provides a generic launcher for external applications that allows you to launch any application or file at a specified time interval during a simulation.
- Co-Simulation API
  Simcenter STAR-CCM+ provides an Application Programming Interface (API) that allows you to write partner code that exchanges data with a running Simcenter STAR-CCM+ simulation. As the partner code can be part of any other application that supports linking to a flat C library, the co-simulation API extends the range of co-simulation scenarios possible with Simcenter STAR-CCM+.
- Data Mappers
  In Simcenter STAR-CCM+, data mappers allow you to interpolate field data available either on a source mesh or on a source table to a target mesh representation, so that the mapped fields can be used for applying boundary or volume conditions on the target mesh.
- Coordinate Cell Clustering
  Simcenter STAR-CCM+ allows you to group mesh cells into clusters, based on their position with respect to a specified coordinate system, and provides a field index for querying values based on cluster. You can create threshold reports based on these clusters of cells.

Exporting Solution Data

Run the simulation to convergence and export the solution to a file.

Define appropriate solver settings and stopping criteria for your simulation, then run it to convergence.
When coupling Lagrangian phases, save the simulation before exporting any data.
Saving the simulation before export ensures that the latest particle data are included in the track file. As results on the track file are always appended, you are always advised to write a new track file, so that the file does not contain results from previous runs.

To export the solution to a file:

Select the External Links > [Link 1] > Values > File node.
To specify the file name and destination, set the Base Filename and Directory properties.
By default, Simcenter STAR-CCM+ saves the file to the current directory as solution.hdf5.
Right-click the External Links > [Link 1] node and select Export File.
You can import the exported file in gPROMS for further analysis.