Home
Pre-Processing
Simcenter STAR-CCM+ solves physics problems on a computational mesh. To provide this mesh, you first define geometry using internal or external tools, and then create a mesh pipeline whose operations generate the mesh in repeatable steps.
Meshing
A mesh is a discretized representation of a geometric domain. This domain can include real-world geometry, its content, and its surrounding environment.
Volume Meshers
Simcenter STAR-CCM+ contains different types of meshers that can be used to generate a volume mesh starting from a suitably prepared surface mesh.
Trimmed Cell Mesher
The trimmed cell mesher provides a robust and efficient method of producing a high-quality grid for both simple and complex mesh generation problems.
Volume Growth Rate
Growth rates control the rate at which cell sizes increase from one cell size to another within the trimmed cell mesh.
Surface Growth Rate
This section describes the properties of the Surface Growth Rate node

Share

Link: copied

Breadcrumb: copied

Pre-Processing
Simcenter STAR-CCM+ solves physics problems on a computational mesh. To provide this mesh, you first define geometry using internal or external tools, and then create a mesh pipeline whose operations generate the mesh in repeatable steps.
- 3D-CAD
  3D-CAD is a feature-based parametric modeler within Simcenter STAR-CCM+ that allows you to build geometries from scratch. The geometries that you create with 3D-CAD are stored as 3D-CAD models, which you can then convert to geometry parts for integration with the meshing and simulation process.
- Modeling Geometry
  This part of the User Guide describes how to use 3D-CAD, the parametric solid modeler available within Simcenter STAR-CCM+. It also describes the features and tools available for further preparation of the geometry model and its surfaces.
- The Surface Repair Tool
  The Surface Repair tool diagnoses errors in, and provides repair tools for, tessellated surfaces and part curves. The same tool allows you to reorganize discretized geometry by searching for face-based features and attributes then assigning the results to new or existing part surfaces or curves.
- Defining the Regions Layout
  An essential part of the process in setting up your simulation is to define the relationship between geometry parts and regions, boundaries, and interfaces.
- Meshing
  A mesh is a discretized representation of a geometric domain. This domain can include real-world geometry, its content, and its surrounding environment.
  - Mesh Construction
    Within a bounding volume defined by geometrical surfaces, Simcenter STAR-CCM+ can construct meshes for finite volume and finite element solvers.
  - Meshers in Simcenter STAR-CCM+
    The meshers in Simcenter STAR-CCM+ generate surface and volume meshes for geometry parts that are assigned to regions and make them ready for analysis.
  - Parts-Based Meshing
    Parts-based meshing (PBM) is a meshing strategy in which you create one or more mesh operations that define workflows for preparing, fixing, and processing geometry. A major benefit of PBM is that every mesh operation you create forms part of a linear and repeatable process.
  - The Meshing Workflow
    This section contains the recommended workflow for setting up and generating the volume mesh at the parts level.
  - Mesh Operations
    Mesh operations perform actions on geometry parts that you can easily repeat whenever their input parts or properties are changed.
  - Mesh Descriptions
    A mesh description is a version of a surface or volume mesh belonging to a geometry part. Geometry parts can have more than one surface mesh description associated with them. You create and change descriptions by importing surfaces or executing operations.
  - Custom Mesh Controls
    Custom controls override any default controls for the surface and volume meshers. This facility allows you to refine or coarsen the mesh for part curves, part surfaces, geometry parts, and specified volumes.
  - Surface Meshers
    Simcenter STAR-CCM+ contains meshing tools which can be used to help prepare a high-quality surface mesh before a volume mesh can be generated.
  - Volume Meshers
    Simcenter STAR-CCM+ contains different types of meshers that can be used to generate a volume mesh starting from a suitably prepared surface mesh.
    - Volume Meshers Overview
      This section introduces volume meshing.
    - Polyhedral Mesher
      Polyhedral meshes provide a balanced solution for complex mesh generation problems.
    - Tetrahedral Mesher
      Tetrahedral meshes provide an efficient and simple solution for complex mesh generation problems.
    - Trimmed Cell Mesher
      The trimmed cell mesher provides a robust and efficient method of producing a high-quality grid for both simple and complex mesh generation problems.
      - Trimmed Cell Mesher Reference
        You can control how trimmed cells are generated using the properties and right-click actions for the Trimmed Cell Mesher node. The properties are found under the Geometry > Operations > Automated Mesh > Meshers > Trimmed Cell Mesher node
      - Setting Trimmed Cell Mesher Default Controls
        The default controls are the global level controls for the trimmed cell mesher.
      - Volume Growth Rate
        Growth rates control the rate at which cell sizes increase from one cell size to another within the trimmed cell mesh.
        Volume Growth Rate Properties
        The Volume Growth Rate node controls the stepping or transition of one cell size to the next within the template that is used for the trimmed cell mesher.
        Default Growth Rate
        This section describes the properties that you can set for the Default Growth Rate.
        Surface Growth Rate
        This section describes the properties of the Surface Growth Rate node
        Relative or Absolute Cutoff Size
        You can set a relative or absolute small cell cutoff size.
        Custom Growth Rate
        If the built-in choice of growth rates fails to provide sufficient control over the number of cell layers that are used for transition between sizes, a custom option can be selected instead.
    - Prism Layer Mesher
      In an Automated Mesh operation, you can use the Prism Layer Mesher in combination with a core volume mesher to generate orthogonal prismatic cell layers at wall surfaces. This layer of cells is necessary to improve the accuracy of the flow solution at wall boundaries.
    - Advancing Layer Mesher
      The advancing layer mesher generates layers of prismatic cells around the surfaces of regions or parts and fills the remaining void with polyhedral cells. This mesher either uses the initial triangular or quadrilateral surface mesh, or converts the triangular mesh to a polygonal or quad surface mesh, depending on the Surface Element Type that you select. This surface mesh is then advanced into the region volume to form cell layers. Some advantages of this approach are a conformal match on either side of an interface, and the ability to generate thicker and more uniform cell layers.
    - Thin Mesher
      The Thin mesher is used to generate a prismatic type volume mesh for thin volumes within parts or regions. Thick or bulk portions of the same geometry are meshed with the core volume mesher.
    - Generalized Cylinder Mesher
      The generalized cylinder mesher generates a swept mesh along the length of parts that are cylindrical. This type of mesher uses the polyhedral and tetrahedral volume meshers to generate a conformal mesh.
    - Volume Mesher Controls and Values
      This section details the common controls, values, and right-click actions for all volume meshers. Controls that are specific to one mesher are detailed in the reference section for that mesher.
  - Mesh Refinement
    Simcenter STAR-CCM+ can refine the mesh by approximating the wake region or using solution-based approach. These features allow you to achieve efficient refinement by reducing the cell size in areas of interest.
  - Directed Meshing
    Directed meshing is a method for generating high quality swept meshes on geometries in Simcenter STAR-CCM+. The method operates by sweeping a mesh from the surfaces of a geometry through its volume onto a facing target surface.
  - Two Dimensional and Axisymmetric Meshes
    The use of a one-cell-thick three-dimensional mesh is much less efficient than using a real two-dimensional mesh for two-dimensional and axisymmetric simulations. When circumstances allow, use real two-dimensional meshes.
  - Turbomachinery Mesh
    Turbomachinery applications with axial blades typically require a flow-aligned, structured mesh. This type of mesh has implicit connectivity and a fixed number of vertex or face neighbors, leading to a more accurate solution.
  - Mesh Visualization
    You can visualize any mesh representation in Simcenter STAR-CCM+. After you have imported or generated a mesh, you visualize it to check the cell quality and mesh validity.
  - Checking the Surface Mesh
    The volume mesh quality is directly dependent on the surface mesh quality. Therefore, it is crucial to make sure that all surface meshes are of good quality.
  - Checking the Volume Mesh
    This section describes the tools available for checking the validity and quality of the volume mesh, and for diagnosing problem areas. Such problems can then be fixed, either inside Simcenter STAR-CCM+ or in the originating mesh generator.
  - Meshing Field Functions Reference
    This section contains a list of field functions that are related to meshing.
  - Working With Representations
    This section provides information on representations as a useful part of the meshing process.
  - Scaling the Entire Mesh
    Scaling the mesh is important as the units of the model must be in meters before running an analysis.
  - Working with Baffles
  - Exporting Mesh and Solution Data
    This section outlines the steps for exporting Simcenter STAR-CCM+ mesh and solution data to formats that can be used in other CAE packages.
  - Multi-Region Meshing
    This section outlines the surface requirements for performing multi-region meshing, as well as step-by-step instructions when starting from surface imports that result in single region and multiple regions definitions. Additionally, guidelines are provided on what the best approaches are for exporting surface data from CAD packages when multiple regions are required.

Surface Growth Rate

This section describes the properties of the Surface Growth Rate node

The properties of the Surface Growth Rate node give access to additional template growth controls for cells next to surfaces of the mesh. The Surface Growth Rate node is only added under the Surface Growth Rate node when the Small and large cells option is chosen on the Trimmed Cell Mesher meshing model.

Properties of the Surface Growth Rate


Small Cell Cutoff Size Type	Sets the size type for the cutoff size.
	Relative to base	Sets the small cell cutoff size type relative to the base size.
	Absolute	Sets the small cell cutoff size type as an absolute value with length units.
Surface Growth Rate	This setting controls the number of cell layers to use in the transition from cells next to surfaces to cells in the core volume.
	The trimmed cell Surface Growth Rate option determines the number of cell layers to grow next to surfaces in the template.
	Disable	Default setting, which means that the default growth rate is also applied to cell layers next to surfaces.
	Fast	Sets one cell layer next to surfaces.
	Medium	Sets two cell layers next to surfaces.
	Slow	Sets four cell layers next to surfaces.
	Very Slow	Sets eight cell layers next to surfaces.
	Custom	Adds a Custom Surface / Boundary Growth Rate node on which to set a user-defined number of cell layers per transition.
Small Cell Surface Growth Rate	This growth rate determines the growth rate in the vicinity of small cells in the template that are less than or equal to the cutoff size.
	Fast	Default setting, which means that the fastest transition from the smallest cell size to the largest is used. This setting usually equates to having only one layer of each cell size for each transition, which results in the least number of cells being created for the supplied input values.
	Medium	Gives a minimum of two equal sized cell layers per transition.
	Slow	Gives a minimum of four equal sized cell layers per transition.
	Very Slow	Gives a minimum of eight equal sized cell layers per transition.
	Custom	Adds a Custom Small Cell Growth Rate node on which to set a user-defined number of cell layers per transition.